The service life of cabinet countertops is closely related to construction and installation. There are many things that need to be paid attention to during the installation process. Today, the editor of Prefab quartz countertops will take you to know what you need to know about the installation of sparkle quartz stone countertop.
1. Before installing the stone, check the flatness of the on-site cabinets and floor cabinets, and check whether there is no error between the tabletop where the stone is installed and the size of the site. If there is an error, it needs to be processed and trimmed again.
2. For some L-shaped countertops or some ultra-long countertops, some strong glass clamps can be used to clamp the stone to squeeze the gap when necessary, and the gaps need to be cleaned up. Here, the editor of Prefab quartz countertops does not advocate polishing the joints between the stone and the wall, especially some dark stone series.

3. Evenly smear some glass glue for color mixing on the bottom of the water retaining strips of the cabinet to adhere to the water retaining strips. Do not use connecting colloids such as marble glue to prevent it from being stuck after bonding. The bonding is too tight and causes cracking or fracture of the stone.
4. If it is necessary to install sinks and other devices, the sparkle quartz stone countertop and the water barrier on the countertop should be partially trimmed and knocked to check whether it is suspended. For some tiny suspended shapes, we can place them on the back bottom of the stone. Add some glass glue for filling. For some serious unevenness, you need to stop the construction and adjust the cabinet countertop to a flat state.
5. During the on-site construction, try to avoid opening the stone on site to prevent improper opening and causing cracks in the stone. The missing glass glue can be cleaned with clean water after ten minutes.
6. When installing on the countertop, you need to keep the distance between the stone and the wall. Generally, the gap is as much as 3-5mm. The main purpose of leaving this gap is to prevent the stone countertops and cabinets from expanding and contracting in the future. Stretching, after installation, you need to put glass glue on the gap.
The above is the introduction of the editor of Prefab quartz countertops: knowledge of sparkle quartz stone countertop installation.